
Greases and Oil compounds
Silicone greases start with a base oil of silicone fluid, to which are added various additives and fillers (metal soap, etc.). Silicone greases exhibit thermal oxidation stability over a wide temperature range, offer good moisture-resistance, and are used primarily for lubrication. Silicone oil compounds are products with a grease-like consistency. They are produced by blending materials such as silica powder into a base oil of silicone fluid. They exhibit thermal oxidation stability over a wide temperature range and have outstanding electrical properties and water repellency. Silicone oil compounds are used primarily in electrical insulators and seals, and for heat dissipation and water repellency. |
|||||||||||||||||
|
PRODUCT
|
Category |
Applications |
Grade |
Features |
|
Greases |
Low-temperature lubrication |
G-30 Series |
Suitable for lubrication in extremely low temperature applications, in which petroleum greases cannot be used. |
|
High-temperature lubrication |
G-40 Series |
Suitable for lubrication of sealed bearings. Performance complies with MIL-L-15719A. |
|
|
G-420 |
Good lubrication particularly at high temperatures. |
||
|
Solvent-resistant lubricant |
FG-720 Series |
Especially good boundary lubrication and solvent resistance. |
|
|
Non-mineral oil lubrication for rubbers |
G-411 |
For rubber cups of automotive brakes. |
|
|
Plastic lubrication |
G-501 |
Does not cause stress cracking in plastic. Good lubrication for steel on steel. |
|
|
Adhesive applications (torque, damper) |
G-330 Series |
General purpose. |
|
|
G-340 Series |
For low temperature applications. Little change in torque values in temperatures ranging from -30 ℃ to +60 ℃. |
||
|
G-630 Series |
For bearings. Good feel. Base oil is non-silicone. |
||
|
Oil compounds |
Electrical insulation, seals |
KS-62F |
Heat-resistant. Paste consistency. |
|
KS-62M |
Heat-resistant. |
||
|
KS-63W |
General purpose. |
||
|
KS-64F |
Paste. |
||
|
KS-64 |
Performance meets MIL-S-8660B specifications. |
||
|
Insulator protection in salty air, electrical insulation |
KS-63G |
Complies with JRS standards. |
|
|
Heat dissipation |
KS-609 |
Thermal conductivity: 0.73W/m·K. General purpose. |
|
|
KS-613 |
Thermal conductivity: 0.76W/m·K. |
||
|
G-747 |
Thermal conductivity: 0.90W/m·K. |
||
|
G-775 |
Thermal conductivity: 3.6 W/m·K. Highly resistant to "pump-out". |
||
|
G-776 |
Thermal conductivity: 1.3 W/m·K*. Low viscosity, and yet low oil bleed. |
||
|
G-777 |
Thermal conductivity: 3.3 W/m·K. All-purpose type. |
||
|
G-765 |
Thermal conductivity: 2.9W/m·K. Main application: IGBT. |
||
|
G-750 |
Thermal conductivity: 3.5W/m·K. Main application: IGBT. |
||
|
G-751 |
Thermal conductivity: 4.5W/m·K. Main application: CPU. |
||
|
X-23-7762 |
Thermal conductivity: 4.0 W/m·K (6.0W/m·K*). Main application: CPU. |
||
|
X-23-7783D |
Thermal conductivity: 3.5 W/m·K (5.5W/m·K*). Main application: CPU. |
||
|
X-23-7868-2D |
Thermal conductivity: 3.6W/m·K (6.2W/m·K*). Main application: CPU. |
||
|
X-23-7921-5 |
Thermal conductivity: 6.0W/m·K. Main application: CPU. |
||
|
Electrical conduction |
KS-660 |
Volume resistivity: 0.83Ω·m. |
|
|
KS-660B |
High lubricity version of KS-660. |
||
|
High vacuum seals |
HIVAC-G |
Good thermo-oxidative stability and chemical stability. Can be used for high vacuums of 10-6 Torr. |
|
|
Rustproof seals |
KS-622 |
Good rustproofing effect on copper. |
|
|
Valve seals |
KS-65A |
Suitable for sealing and lubrication of valves, stopcocks, and packing of common chemical equipment. |
|
|
KS-623 |
|||
|
Silicone rubbers |
KS-650N |
Does not cause swelling of silicone rubber. Good electrical insulation. |
|
|
KS-651 |
Does not cause swelling of silicone rubber. Good electrical properties and temperature characteristics. |
||
|
Optical applications |
Optseal |
Good light transmissivity. Refractive index (25 ℃) 1.4690. Non-flowable. |
|
|
Optseal-L |
Good light transmissivity. Refractive index (25 ℃) 1.4690. Slightly flowable. |
