LIMS (Liquid silicone rubber Injection Molding System)
| The name “LIMS” describes a molding system in which liquid silicone rubber is used in high-precision injection molding machines. All steps are automated, from mixing to molding. This system saves labor and time, and makes it easy to produce high-quality molded items. |
|
 |
 |
|
| |
Saves time
|
|
|
Addition-cure liquid silicone is used, so cure speed is fast and molding time can be reduced.
|
| |
Increased productivity
|
|
|
The materials are liquids, so molding can be done at low injection pressures. The system is also suitable for molding of high-precision components.
|
| |
Automation of the molding process
|
|
|
Suitable for flashless, runnerless molding. And because molded items release easily from the mold after curing, the molding process can be automated.
|
| |
Environmentally friendly
|
|
|
There are no byproducts generated during curing. With flashless and runnerless molding, there is no need to process waste material, meaning a more environmentally friendly manufacturing process.
|
|
PRODUCT
|
Application
|
Grade
|
Features
|
|
Fast cure
Transparent
High strength
|
KEG-2000-40A/B
|
Flashless, runnerless molding.
Continuous automated molding with short cycle times is also possible.
|
|
KEG-2000-50A/B
|
|
KEG-2000-60A/B
|
|
KEG-2000-70A/B
|
|
KEG-2001-40A/B
|
|
KEG-2001-50A/B
|
|
Low viscosity
Transparent
High strength
|
KE-1950-10A/B
|
They are highly safe and meet the standards of Japan's Food Sanitation Law.
Before using, be sure to determine whether these materials comply with comparable laws in your country.
|
|
KE-1950-20A/B
|
|
KE-1950-30A/B
|
|
KE-1950-35A/B
|
|
KE-1950-40A/B
|
|
KE-1950-50A/B
|
|
KE-1950-60A/B
|
|
KE-1950-70A/B
|
|
High transparency
|
KE-1935A/B
|
For diving masks.
|
|
KE-1987A/B
|
|
KE-1988A/B
|
|
Non post cure
Reduced low-molecular-
weight siloxane
|
KE-2019-40A/B
|
Reduced
low-molecularweight siloxane.
|
|
KE-2019-50A/B
|
|
KE-2019-60A/B
|
|
Non post cure
Reduced low-molecula-
rweight siloxane
Oil bleed
|
KE-2017-30A/B
|
Oil bleed and low volatile.
|
|
KE-2017-40A/B
|
|
KE-2017-50A/B
|
|
|
|
LIMS Self-adhesives
|
|
Shin-Etsu Self-adhesive Liquid Silicone bonds well to a variety of plastics, including the following:
· Polycarbonate (PC)
· Polybutylene terephthalate (PBT)
· Polyphenylene oxide (PPO)
· Polyamide resins (Nylon 66, Nylon 6)
The adhesion obtained with each of these resins has proven resistant to degradation under a wide range of temperatures and humidity. All provide outstanding, durable adhesion to most resins. Our offerings also include products that meet FDA, BfR, and USP class 6 requirements, or contain low levels of low-molecular-weight (LMW) siloxanes.
|
|
Application
|
Grade
|
Features
|
|
Co-injection molding and
Insert molding
|
KE-2090-40A/B
|
For PC and PBT resins.
|
|
KE-2090-50A/B
|
|
KE-2090-60A/B
|
|
KE-2090-70A/B
|
|
KE-2096-40A/B
|
For PA resins and metals.
|
|
KE-2096-50A/B
|
|
KE-2096-60A/B
|
|